+61 409 376 569 admin@albanyfc.com.au

Your graphics card will be plugged into this slot but it won’t come out until you press down on the clip and then pull the graphics card away from the slot. In the image below, the clip itself has been marked by the number 3. Now that the power cable is removed, it’s time to unscrew the graphics card from the motherboard I/O. As shown below , there should be one or two screws securing the graphics card in place.

The default free space is 500 MB and you may share the product on social media to get another 1.5 GB. Type exit to finish the process when the disk checkup process is finished. Choose one of the options and continue to install. Click on the Load Driver button when you see Where you want download mouse drivers to install Windows. If the disk is not available in BIOS, please try to fix by followings ways.

Turn your PC on again and try to enter BIOS settings by pressing the BIOS key as the system is about to start. The BIOS key is typically displayed on the boot screen, saying “Press ___ to enter Setup.” There are other keys as well.

With the side cover of the case removed, you should be able to see and access the screw clearly. Depending on how big the graphics card is, it will be secured with either one or two screws. To be able to remove the graphics card, remove the screw holding it in place. Even though a PC is a digital computer, replacing any component will still require you to ‘go under the hood’ and physically replace something. For upgrading your graphics card, we recommend that you have a set of Phillips screwdrivers close.

Refer to the software help files for additional assistance. This procedure uses third-party software and is typically performed by home PC users.

How do I update my HDD drivers?

How to update drivers using Device Manager 1. Open Start.
2. Search for Device Manager and click the top result to open the tool.
3. Double-click the branch with the hardware you want to update.
4. Right-click the hardware and select the Update driver option.
5. Click the Search automatically for updated driver software option.

The above article may contain affiliate links, which help support How-To Geek. All four RAM modules re-installed, with the data cables on the motherboard replaced. We’re ready to close up.Replace the access panel and screw it back down on the rear of the machine. Take your machine back to its usual spot and plug everything back in.

  • If you have other drives present, the possibility of other drives being set by default as the boot disc is likely.
  • Navigate to the BOOT section and confirm that RAID volume is set as the primary boot device.
  • Always do chipset first, otherwise some of the drivers you go to install may not take since the motherboard wasnt installed.
  • I like to do my clean install with no other drives present.
  • On computers, a device driver is a package with instructions that allows Windows 10 to communicate and control a particular piece of hardware .

DriverEasy.com is the website from where you can download and purchase Driver Easy. Additionally, this website also provides solutions to some common PC issues including the Blue Screen and Black Screen ones. While going through their posts, we found that most of the problems listed on the website have a common solution, that is, using Driver Easy. It can also work as a system information tool as it displays the basic info about CPU, motherboard, graphics card, etc.

A standard phillips or flathead screwdriver will work here. Labeled above , you can see the graphics card power cable. Press down on the clip and then pull it away from the graphics card. If it’s not budging, make sure you are pulling down on the clip. This clip keeps the power cable securely in place.

How To Check Device Driver Versions On Windows 10

Our current lineup of Twin Frozr VI series graphics cards are powerful enough for playing the latest games. Well, they each take blows, but that board only supports CFX, so I will be using a AMD GPU. I like AMD better than Nvidia and better than Intel anyway. Although, I am not one of those fan-boys who will only buy AMD. Search for PowerShell, right-click the top result, and select Run as administrator. I used to follow the "order of install" stuff.

After performing all the above steps, disconnect your printer from your computer if it is connecting via a USB connection or disconnect it from the router if it is using wireless. Shut down your computer, printer, and your router. Now press Windows + R, type “appwiz.cpl” in the dialogue box and press Enter.